> Golf Clubs > Irons > Ping G20 Iron Set with Steel Shafts 
Representative Photos
;)
;)
;)
;)
- Ships out in 1-2 Business Days
-
Goods Tag
Forgiveness and accuracy are achieved
through extreme perimeter weighting in the 17-4 stainless steel head. A multi-material cavity badge made of soft elastomer improves feel and sound while enhancing distance control, allowing you to play your best golf.
Consistent, precise distance control
was achieved by using a thin face backed by a floating CTP structure. Weight in the back flange of the deeply cut, multi-cavity head increases the MOI. Combined with PING’s new CFS steel shaft, the G20 optimizes feel and trajectories.
Club Technology
Distance Control
The cavity's floating CTP structure stabilizes a thin face to generate fast ball speeds and enhance distance control.
Optimized CG Position
Weight saved by thinning the face allowed Ping engineers to redistribute weight to the perimeter and the back flange, which positions the CG low and back to launch the ball higher and longer.
Thin Face
A multi-material cavity badge made with soft elastomer heel and toe sections improves feel and sound.
Clean Appearance
The hosel-to-head transition inspire confidence at address that the ball will launch easily from any lie.
Club Specifications
|
Green
2.50" UPRIGHT |
|
BLUE
.75° UPRIGHT |
|
BLACK
STANDARD |
|
Available "IN STOCK" color codes
|
|
*For more colorcode, please contact with our customer service.
|
| Shaft Options | |||||
| Steel | LADIES | SOFT R | REGULAR | STIFF | X-STIFF |
| True Temper | * Available | * Available | |||
| G20 Irons | ||||||
| Club | Length | Loft | Lie | Offset | Bounce | Swgt. |
| 3 | 38.75" | 20° | 59.25° | 0.32" | -2.0° | D0 |
| 4 | 38.25" | 23° | 60.00° | 0.30" | 0.0° | D0 |
| 5 | 37.75" | 26° | 60.75° | 0.29" | 2.0° | D0 |
| 6 | 37.25" | 29° | 61.50° | 0.27" | 4.0° | D0 |
| 7 | 36.75" | 32° | 62.25° | 0.24" | 6.0° | D0 |
| 8 | 36.25" | 36° | 63.00° | 0.22" | 8.0° | D0 |
| 9 | 35.75" | 40° | 63.75° | 0.20" | 9.0° | D0 |
| PW | 35.50" | 45° | 64.00° | 0.18" | 10.0° | D2 |
| UW | 35.50" | 50° | 64.00° | 0.15" | 11.0° | D2 |
| SW | 35.25" | 54° | 64.25° | 0.13" | 12.0° | D4 |
| LW | 35.00" | 58° | 64.50° | 0.10" | 13.0° | D6 |
|
* These are design specifications that may vary due to manufacturing tolerances |
||||||
